Gas emergency: if you smell gas right now
Do not call a plumber first. Do this, in this order.
- Leave the house and take everyone with you.
- Do not flip switches, use phones indoors, or start a car in the garage.
- From outside, call SoCalGas at 1-800-427-2200 or 911.
- Wait for SoCalGas to make the site safe. Then call us for the repair on your side of the meter.
Who handles which part of the gas system
| Part | Responsible | Call |
|---|---|---|
| Street main and service line to the meter. | SoCalGas. | SoCalGas. |
| The meter and regulator. | SoCalGas. | SoCalGas. |
| Piping from the meter into the house. | Property owner. | A plumber. |
| Appliance connectors and shutoff valves. | Property owner. | A plumber. |
New gas lines and upsizing
Adding an appliance is often more than running a new branch. Gas piping is sized for the total load of everything connected to it. A tankless water heater, a large range or a pool heater can push an older system past what its pipes can carry.
We calculate the load against the California Plumbing Code, which is based on the Uniform Plumbing Code (UPC) and includes the fuel gas sizing tables. If the existing line is too small, we upsize it from the meter. This comes up often with tankless water heater installs.
Before any buried line is dug, underground utilities are marked through the 811 call-before-you-dig system.
Earthquakes and gas connections
Rigid connections at appliances can crack when the ground moves. Flexible, code-approved connectors and a properly braced water heater reduce that risk.
Some homeowners also add an automatic seismic gas shutoff valve at the meter. It is optional for most existing homes, and it must be a state-certified model installed with a permit. We can explain the trade-offs, including that a tripped valve needs relighting of every pilot.
Old uncoated brass appliance connectors should be replaced. They were never designed to last as long as some are still in use.
Appliance hookups we handle
Each hookup includes a new code-approved connector, a shutoff valve at the appliance and a leak test.
- Gas ranges and cooktops, including kitchen remodels that move the range.
- Gas dryers, which need a dedicated shutoff and proper venting clearance.
- Water heaters, tank or tankless.
- Fireplace inserts and log sets.
- Barbecues, fire pits and outdoor kitchens, usually with a buried line.
- Pool and spa heaters, which draw a large load.
Converting an electric appliance to gas, or the other way, often means new piping or a new circuit. We plan both before quoting.
Gas problems that are not emergencies
Some gas issues are worth a call but not an evacuation. A yellow or lazy flame on a range burner usually points to the appliance or its air adjustment. A pilot that keeps going out on a water heater is often a thermocouple or flame sensor.
An old appliance connector is the one to act on soon. Flexible connectors wear out, and older uncoated brass connectors should be replaced whenever an appliance is moved or serviced. If you ever smell gas, treat it as an emergency first.
Many gas lines in Mesa Verde, the Eastside and Mesa del Mar were sized decades ago for a tank water heater, a furnace and a range, so adding a tankless heater, a pool heater or an outdoor kitchen usually starts with a load check.
Gas leak checks and written results
Not every gas call is an active leak. Buyers, sellers and landlords often need to know the house piping is tight, and some people want an older line checked after noticing rust or a faint smell that came and went.
A check of the house piping is a pressure test. We isolate the system on your side of the meter, pressurize it and watch a gauge for any drop, then test joints and connectors one by one. You get the results in writing.
If you smell gas strongly right now, this is not the place to start. Leave, and call SoCalGas at 1-800-427-2200 from outside.
What gas line work costs
| Factor | Why it matters |
|---|---|
| Scope | A single appliance hookup costs less than a new run to the backyard. |
| Length and route | Long runs through attics or underground add pipe and labor. |
| Upsizing | Replacing an undersized line from the meter is a larger job. |
| Permit and testing | Every job includes a pressure test. Most need a city permit. |
| Trenching | Buried lines add digging and surface restoration. |
Safety note: gas work must be pressure-tested and inspected. Skipping the permit can create problems with insurance and at resale.
Want your real number? Call (714) 750-8637 and describe the job.
Gas work in and around Costa Mesa
We install and repair gas piping across 92626 and 92627 and in nearby cities like Newport Beach. For a new water heater on an existing line, see the water heater replacement page.